Gear box

Couple days ago I brought a truck in for an inspection and I found that the gear box was leaking from the main shaft. So we had one in stock and I changed it out. Pretty easy job only hard part is that the box is pretty heavy and aligning the bolts up took a couple tries. Also I used the box end of the 1 5/16 wrench and put it again the top part of the frame rail so that I could take the nut off with the impact gun. I usually work alone because while going to school I have to work late by my self so I find ways to help my self out. Here are some pictures....

drain the power steering fluid 

Taking the bolts and everything else off. 

Fully removed.